Capture One PRO 6.1.1 46648 x64 [2011, Multi, NO RUS]

This is a service release improving quality and providing additional camera support
Bugfixes
In particular, the following issues are addressed:
[*]Fixed an issue where LCC files from older versions of Capture One could not be used.
[*]Improved OpenCL performance and stability in some situations.
[*]Improved Image Quality for Leica D-‐Lux5, Panasonic DMC-‐LX5, Canon 5D Mark II and Pentax K-‐5, K-‐r and Olympus E-‐5.
[*]Fixed a few issues related to Capture Pilot.In addition the release contains fixes for a number of other issues.
Camera Support
[*]Leaf Aptus‐II 12 SensorFlex 1:1, 2:3 and3:4 modes
[*]Leaf Aptus‐II 12R and AFi‐II 12
[*]Olympus E‐PL2 and XZ‐1

Phase One:
IQ180 (preliminary), IQ160 (preliminary), IQ140 (preliminary), P 65+, P 40+, P 45+, P 30+, P 21+, P 25+, P 20+ Achromatic+, P 45, P 30, P 25, P 21, P 20, H 25, H 20, H 101, H 10, H 5, LightPhase.
Mamiya:
DM56, DM40, DM33, DM28, DM22, M31, M22, M18, MZD, ZD Back.
Leaf:
Aptus‐II 12R, Aptus‐II 12, Aptus‐II 10R, Aptus‐II 10, Aptus‐II 8, Aptus‐II 7, Aptus‐II 6, Aptus‐II 5, AFi‐II 12, AFi‐II 10, AFi‐II 7, AFi‐II 6, Aptus 75S, Aptus 65S, Aptus 54S, AFi 7, AFi 6, AFi 5, Aptus 75, Aptus 65, Aptus 22, Aptus 17.
Canon:
1D Mark IV, 1Ds Mark III, 1D Mark III, 1D Mark II N, 1Ds Mark II, 1D Mark II, 1Ds, 1D, 7D, 5D Mark II, 5D, 60D, 50D, 40D, 30D, 20D, 10D, 550D/Rebel T2i, 500D/Rebel T1i, 450D/Rebel XSi, 400D/Rebel XTi, 350D/Rebel XT, 300D/Rebel, 1000D, D60, D30, Pro 1, G12, G11, G10, G9, G6, G5, G3, G2, S95, S90.
Epson:
R‐D1s, R‐D1.
Fuji:
S5 Pro, S3 Pro, S2 Pro.
Konica Minolta:
Alpha 5 D / Maxxum 5 D / Dynax 5 D, Alpha 7 D / Maxxum 7 D / Dynax 7 D, A1, A2.
Leica:
D‐Lux 5, X1, M9, M8, D‐Lux 4, Digilux 3, Digital Module R for R8 and R9 cameras.
Nikon:
D3s, D3X, D3, D2Xs, D2X, D2Hs, D2H, D1X, D1H, D700, D300s, D300, D200, D100, D90, D80, D70s, D70, D60, D50, D40X, D40, D7000, D5000, D3100, D3000, P7000, P6000.
Olympus:
E‐5, E‐PL2, E‐PL1, XZ‐1, E‐620, E‐3, E‐520, E‐510, E‐450, E‐P1, E‐P2, E‐420, E‐410, E‐500, E‐ 1, E‐10, E‐20, E‐30, E‐330, E‐300, E‐400, C‐7070, C‐8080.
Panasonic:
DMC‐GF2 (preliminary), DMC‐GF1, DMC‐GH2 (preliminary) DMC‐G2, DMC‐GH1, DMC‐G1, DMC‐G10, DMC‐LX5, DMC‐LX3, DMC‐FZ100, DMC‐FZ45.
Pentax:
K‐5, K‐r, K20D, K10D, K7, KX, K200D, K110D, K100D Super, K100D, K2000/K‐m, *istDL2, *istDL, *istD, *istDS2, *istDS. Only PEF files supported.
Sony:
DSLR‐A900, DSLR‐A850, DSLR‐A700, DSLR‐A550, DSLR‐A500, DSLR‐A380, DSLR‐A350, DSLR‐A330, DSLR‐A300, DSLR‐A230, DSLR‐A200, DSLR‐A100, DSC‐R1.
Adobe:
DNG 1.2 (raw DNG support only). The DNG support is not optimized for specific cameras.

Phase One:
IQ180 (preliminary), IQ160 (preliminary), IQ140 (preliminary), P 65+, P 40+, P 45+, P 30+, P 21+, P 25+, P 20+ Achromatic+, P 45, P 30, P 25, P 21, P 20, H 25, H 20, H 101, H 10, H 5, LightPhase.
Mamiya:
DM56, DM40, DM33, DM28, DM22, M31, M22, M18. Leaf: Aptus‐II 12R, Aptus‐II 12, Aptus‐II 10R, Aptus‐II 10, Aptus‐II 8, Aptus‐II 7, Aptus‐II 6, Aptus‐ II 5, AFi‐II 10, AFi‐II 7, AFi‐II 6.
Leaf:
Aptus 75S, Aptus 65S, Aptus 54S, AFi 7, AFi 6, AFi 5, Aptus 75, Aptus 65, Aptus 22, Aptus 17.
Canon:
1D Mark IV, 1Ds Mark III, 1D Mark III, 5D Mark II, 7D, 60D, 50D, 40D, 550D/Rebel T2i, 500D/Rebel T1i, 450D/Rebel XSi, 1000D/Rebel XS. Some older Canon models may work to some extent but no support is provided for these.
Nikon:
D3s, D3x, D3, D700, D300, D300s, D200, D90, D80, D60, D5000, D40x, D40.
The extent of tethered support will vary depending on the back/camera connected.