CBT Nuggets CCDA 640-863 DESGN

Производитель: CBT Nuggets
Год выпуска: 2009
Язык: английский

There's an old saying that goes "If you fail to plan, you plan to fail." Designing for Cisco Internetwork Solutions helps you learn how to plan a LAN/WAN infrastructure using analysis and modeling techniques to design a network using Cisco components.
This CCDA training is cutting edge and focuses on the newest Cisco PDIOO (Plan, Design, Implement, Operate, Optimize) analysis and methodology as well as teaching Cisco Enterprise Composite Network Modeling as the next generation beyond the Cisco 3-layer Design (Access/Distribution/Core). You'll learn modular analysis and modeling along with the newest multilayer switching technology, routing essentials, IP telephony, IP addressing with NAT and IPv6, Management and more.
Instructor Michael Shannon has broken the topics down into easy to understand segments filled with information that you can readily put to use on the job. If you are already certified as a CCNA, this training will give you a lot of background and theory on network design to make you a more knowledgeable and effective IT professional.
Exam 640-863 DESGN is the only exam required to earn the Cisco Certified Design Associate certification. A basic understanding of Cisco networking such as a CCNA certification or equivalent knowledge is recommended before viewing these videos. The training contains 16 videos providing more than 11 hours of instruction.
CD-ROM Contents: Cisco CCDA-DESGN Training

1. Network Design Principles (Part 1): Policies, Procedures, and the PDIOO Method
   
2. Network Design Principles (Part 2): Recognizing Customer Needs
   
3. Network Design Principles (Part 3): 8-Step Design Methodology
   
4. Modular Network Solutions (Part 1): The Cisco Enterprise Network Model
   
5. Modular Network Solutions (Part 2): Modular Network Solutions and Intelligent Services
   
6. Basic Switching Design Methods (Part 1): Layer 1 through Layer 3 Technologies
   
7. Basic Switching Design Methods (Part 2): Enterprise Campus Switching Design Methods
   
8. Choosing Your Routing Protocol (Part 1): RIPv2, IGRP, and EIGRP Comparisons
   
9. Choosing Your Routing Protocol (Part 2): OSPF, IS-IS, and BGP4 Comparisons
   
10. Basic WAN Design (Part 1): Enterprise Edge WAN Design, Planning and Technologies
    
11. Basic WAN Design (Part 2): WAN, VPN, and Internet Backup Solutions
    
12. IP Address Design Techniques
    
13. Designing Voice Networks
    
14. Assessing Network Security
    
15. Designing Network Management
    
16. Introduction to the CCDA Update Series
    
17. Network Design Methodology
    
18. Wireless LAN Design
    
19. IPv6
    
20. Security Management
    
21. IP Telephony Design

Техданные:
Audio: Windows Media Audio 44100Hz mono 32Kbps [Raw Audio 0]
Video: MSS2 640x480 10.00fps 250Kbps [Raw Video 1]
Audio: Windows Media Audio 44100Hz mono 48Kbps [Raw Audio 0]
Video: WVC1 800x600 15.00fps 74Kbps [Raw Video 1]

pochemu kogda nazhimaesh na Part 1 on pokazivaet Part 2

Большое спасибо. Это самое свежее?

это последнее из имеющегося по идее-версия должна быть 2.0)
но я тут слышал, что в сентябре новая система сертификации CCDA будет введена, так что где-т оп весне этот экзамен закроют-надо поторопиться (ориентировочная дата, оставшаяся у меня в памяти-середина февраля)
https://learningnetwork.cisco.com/docs/DOC-10265 вот тут более ясная инфа
ща на днях CCNA сдам и буду тоже по этому материалу готовиться может быть успею)))
эм... начал глядеть, но это ж видеокурс... а такого же интерактива как в ссна нет тут? оО