[не удалять] XviD4PSP - универсальный медиаконвертер [архив №4]

а не получается...

Сигнатура проблемы:
Имя события проблемы: APPCRASH
Имя приложения: XviD4PSP.exe
Версия приложения: 5.10.234.0
Отметка времени приложения: 4da626bf
Имя модуля с ошибкой: StackHash_2264
Версия модуля с ошибкой: 0.0.0.0
Отметка времени модуля с ошибкой: 00000000
Код исключения: c0000005
Смещение исключения: 0298b5ed
Версия ОС: 6.1.7601.2.1.0.256.1
Код языка: 1049
Дополнительные сведения 1: 2264
Дополнительные сведения 2: 2264db07e74365624c50317d7b856ae9
Дополнительные сведения 3: 875f
Дополнительные сведения 4: 875fa2ef9d2bdca96466e8af55d1ae6e

Имя сбойного приложения: XviD4PSP.exe, версия: 5.0.37.8, отметка времени: 0x4bb1a51a
Имя сбойного модуля: unknown, версия: 0.0.0.0, отметка времени 0x00000000
Код исключения: 0xc0000005
Смещение ошибки: 0x05b6b5ed
Идентификатор сбойного процесса: 0x1c64
Время запуска сбойного приложения: 0x01cd0a142c011136
Путь сбойного приложения: C:\XviD4PSP 5\XviD4PSP.exe
Путь сбойного модуля: unknown
Код отчета: 02f34c17-7608-11e1-81c1-6cf0490f6667

+----------------------------------------------------------------------------------------+
| |
| SmoothAdjust plugin: SmoothLevels(), SmoothTweak(), SmoothCurve() & SmoothCustom() |
| |
| v2.00 pre-release by "LaTo INV." |
| |
| 12 october 2011 |
| |
+----------------------------------------------------------------------------------------+
DESCRIPTION :
=============
SmoothAdjust is a set of 4 plugins to make YUV adjustements:
- SmoothLevels allows to change levels & gamma with optional limiting
- SmoothTweak allows to change brightness, contrast, saturation & hue
- SmoothCurve allows to change a plane according to a fixed curve
- SmoothCustom allows to change a plane according to a custom expression
These 4 plugins have a smoothing & dithering algorithm to avoid banding issue.
Calculations are made in 32bits to avoid rounding errors and artifacts.
SmoothAdjust is multithreaded (max 16 threads by plane) and optimized (SSE2/AVX).
MSVC & ICL builds are provided for x86 & x64 platforms.
REQUIREMENTS :
==============
- Avisynth 2.5.x or Avisynth 2.6.x
- YUV Planar (Y8, YV411, YV12, YV16, YV24)
- 8bits or 16bits(MSB/LSB)
- SmoothLevels( input_low, gamma, input_high, output_low, output_high, chroma, limiter, TVrange, preset,
Lmode, darkSTR, brightSTR, Ecurve, Ecenter, protect,
smooth, dither, useMT, useOPT, show, screenW, screenH, scale )
- SmoothTweak( brightness, contrast, saturation, hue1, hue2, limiter, TVrange,
smooth, dither, useMT, useOPT, show, screenW, screenH, scale )
- SmoothCurve( Ycurve, Ucurve, Vcurve, interp, limiter, TVrange,
smooth, dither, useMT, useOPT, show, screenW, screenH, scale )
- SmoothCustom( Yexpr, Uexpr, Vexpr, limiter, TVrange,
smooth, dither, useMT, useOPT, show, screenW, screenH, scale )
- SmoothLevels16(...), SmoothTweak16(...), SmoothCurve16(...), SmoothCustom16(...) for 16 bits
COMMON SETTINGS :
=================
smooth [default: 100]
---------------------
Strength of the smoothing
0 = disable (faster +++)
1 = weak
xx = intermediary
200 = strong
dither [default: 50]
--------------------
Type of the dithering
-1 = dithering OFF
0 = pattern
xx = intermediary
100 = noise
useMT [default: -1]
-------------------
Use multithreading if necessary
-1 = automatic choice
0 = multithreading OFF
xx = xx threads for each plane (max = 16 threads per plane)
useOPT [default: -1]
--------------------
Use SSE2/AVX optimization when available
-1 = automatic choice
0 = use C code
1 = use SSE2 code
2 = use AVX code
show [default: false]
---------------------
Show the debug view at fullscreen resolution
screenW / screenH [default: -1 / -1]
------------------------------------
Specific screen resolution for debug view
scale [default: true]
---------------------
Auto-scale the size of parameters in debug view
SMOOTHLEVELS - GENERAL SETTINGS :
=================================
levels parameters [default: 16, 1.0, 235, 16, 235]
--------------------------------------------------
input_low [0-255]
gamma [> 0.0]
input_high [0-255]
output_low [0-255]
output_high [0-255]
chroma [default: 100]
---------------------
Strength for chroma (conversion based on levels parameters)
0 = no chroma processing
xx = weak
100 = normal chroma processing
xx = strong
200 = maximum chroma processing
limiter [default: 0]
--------------------
Clamp the output values
0 = no limiter
1 = clamp to output_low/output_high
2 = clamp to 16-235 for luma & 16-240 for chroma
TVrange [default: true]
-----------------------
Range of the clip (affects only limiting, see Lmode)
preset [default: "default"]
---------------------------
"fullrange" = use "0, 1.0, 255, 0, 255" as default levels
"pc2tv" = PC -> TV conversion
"tv2pc" = TV -> PC conversion
SMOOTHLEVELS - LIMITING SETTINGS :
==================================
Lmode [default: 0]
------------------
Mode to reduce conversion on special areas for better looking result
0 = no limiting
1 = limit conversion on dark & bright areas (apply conversion @0% at luma=0 & @100% at luma=Ecenter & @0% at luma=255)
2 = limit conversion on dark areas (apply conversion @0% at luma=0 & @100% at luma=255)
3 = limit conversion on bright areas (apply conversion @100% at luma=0 & @0% at luma=255)
(If TVrange=true, 16 & 235 are used instead of 0 & 255)
darkSTR [default: 100]
----------------------
Strength for limiting: the higher, the more conversion are reduced on dark areas (for Lmode=1&2)
brightSTR [default: 100]
------------------------
Strength for limiting: the higher, the more conversion are reduced on bright areas (for Lmode=1&3)
Ecurve [default: 0]
-------------------
Type of curve used for limiting
0 = sine curve
1 = linear curve
Ecenter [default: 128]
----------------------
Center of expression for Lmode=1
protect [default: -1]
---------------------
-1 = protecting off
>=0 = black zone protection
---> don't apply conversion on pixels egal or below this value
(ex: with 16, the black areas like borders
and generic are untouched so they don't look washed out)
SMOOTHTWEAK SETTINGS :
======================
brigthness [default: 0]
-----------------------
-255...0 = decrease the brigthness
0...+255 = increase the brigthness
contrast [default: 1.0]
-----------------------
0.0...1.0 = decrease the contrast
1.0...10.0 = increase the contrast
saturation [default: 1.0]
-------------------------
0.0...1.0 = decrease the saturation
1.0...10.0 = increase the saturation
hue1 [default: 0]
-----------------
-255...0 = shift the hue towards yellow
0...+255 = shift the hue towards blue
hue2 [default: 0]
-----------------
-255...0 = shift the hue towards green
0...+255 = shift the hue towards red
limiter [default: false]
------------------------
Clamp the output to 16-235 for luma & 16-240 for chroma
false = OFF
true = ON
TVrange [default: true]
-----------------------
Range of the clip (affects only contrast adjustment)
SMOOTHCURVE SETTINGS :
======================
Ycurve [default: "0-0;255-255"]
-------------------------------
Curve for the Y plane (luma)
Synthax: "a-b;c-d;e-f;..." a, c & e are source values and b, d & f are destination values
---> Examples: "0-0;255-255" = do nothing
"0-255;255-0" = invert the clip
"0-16;255-235" = PC to TV conversion
"0-0;16-0;235-255;255-255" = TV to PC conversion
Ucurve [default: "0-0;255-255"]
-------------------------------
Curve for the U plane (chroma)
Vcurve [default: "0-0;255-255"]
-------------------------------
Curve for the V plane (chroma)
interp [default: 100]
---------------------
Interpolation mode between control points
0 = linear
xx = intermediary
100 = cubic
limiter [default: false]
------------------------
Clamp the output to 16-235 for luma & 16-240 for chroma
false = OFF
true = ON
TVrange [default: 0]
--------------------
Convert the curves to TVrange(16-235/16-240) before applying conversion
0 = OFF
1 = ON, clip values outside TVrange
2 = ON, process values outside TVrange
SMOOTHCUSTOM SETTINGS :
=======================
Yexpr [default: "Y"]
--------------------
Expression for the Y plane (luma)
---> OPERATORS:
----------
Arithmetic : ^ * / % + -
Comparison : ! > < >= <= == != && ||
Ternary : ? :
Constant : pi
---> FUNCTIONS:
----------
sin, cos, tan, asin, acos, atan, sinh, cosh, tanh, exp, log, ln, sqrt, abs, round, floor, ceil
---> Examples: "Y" = do nothing
"255-Y" = invert the clip
"Y+32" = adjust brightness
"Y*2" = adjust contrast
Uexpr [default: "U"]
--------------------
Expression for the U plane (chroma)
---> Example: "abs(U-128)+128"
Vexpr [default: "V"]
--------------------
Expression for the V plane (chroma)
---> Example: "round(V/16)*16"
limiter [default: false]
------------------------
Clamp the output to 16-235 for luma & 16-240 for chroma
false = OFF
true = ON
TVrange [default: 0]
--------------------
Convert the expressions to TVrange(16-235/16-240) before applying conversion
0 = OFF
1 = ON, clip values outside TVrange
2 = ON, process values outside TVrange
16 BITS SETTINGS :
==================
Some parameters must be mapped to the [0-65535] range before use:
- SmoothLevels: input_low, input_high, output_low, output_high, Ecenter, protect
- SmoothTweak: brightness, hue1, hue2, limiter
- SmoothCurve: Ycurve, Ucurve, Vcurve
- SmoothCustom: Yexpr, Uexpr, Vexpr
For example: SmoothCurve("0-255;128-128;255-0") --> SmoothCurve16("0-65535;32768-32768;65535-0")

MKVExtractGUI-2 is a Matroska (mkv) track extraction GUI tool for work with mkvtoolnix. Requires mkvtoolnix. Demux mkv streams, split video, audio and subtitle to separate files, from an MKV file.

Ресайз для перфекционистов: А --> AddBorders http://avisynth.org.ru/docs/russian/index.htm

#plugin_files
#ccd_sse2.vdf
#vdf_arguments:CamCD:0
#Deblock.dll
#dctfilter.dll
#RemoveGrainSSE3.dll
#mvtools2.dll
#RepairSSE3.dll
#fft3dfilter.dll
#fft3dgpu.dll
#degrainmedian.dll
#MaskTools.dll
#mt_masktools-25.dll
#MT.dll
#Gradfun2db.dll
#AddGrainC.dll
#WarpSharp.dll
#SangNom.dll
#maa.avs
#Gradfun2dbmod.avs
#Deblock_QED_MT2.avs
#SmoothLevels.avs
#SeeSaw.avs
#LimitedSharpenFaster Mod.avs
setmtmode(2)
setmemorymax(1024)
smoothlevels(gamma=1.0).maa()# при необходимости гамму подкрутить руками
#Deblock_QED()# включить при повышенной блочности
source=last
spat=source.degrainmedian(mode=3,limity=8,limituv=8)
spatD=mt_makediff(source,spat)
#preNR = source.fft3dfilter(wintype=1,degrid=1,bw=32,bh=32,ow=16,oh=16,bt=3,sigma=2.75,sigma2=2.2,sigma3=1.7,sigma4=3,plane=0)
preNR = source.fft3dgpu(wintype=1,degrid=1,bw=16,bh=16,ow=8,oh=8,bt=3,sigma=2.75,sigma2=2.2,sigma3=1.7,sigma4=3,plane=0)
preNR_super = preNR.MSuper(pel=2, sharp=2, rfilter=2)
source_super = source.MSuper(pel=2, sharp=2, levels=1)
vb2 = MAnalyse(preNR_super, isb=true,truemotion=true,delta=2,blksize=16,overlap=4,lambda=2000,pelsearch=2,search=2,searchparam=2,DCT=0,chroma=false)
vb1 = MAnalyse(preNR_super, isb=true,truemotion=true,delta=1,blksize=16,overlap=4,lambda=2000,pelsearch=2,search=2,searchparam=2,DCT=0,chroma=false)
vf1 = MAnalyse(preNR_super,isb=false,truemotion=true,delta=1,blksize=16,overlap=4,lambda=2000,pelsearch=2,search=2,searchparam=2,DCT=0,chroma=false)
vf2 = MAnalyse(preNR_super,isb=false,truemotion=true,delta=2,blksize=16,overlap=4,lambda=2000,pelsearch=2,search=2,searchparam=2,DCT=0,chroma=false)
NR1 = source.MDegrain2(source_super,vb1,vf1,vb2,vf2,thSAD=400,thSCD1=500,thSCD2=135).Temporalsoften(2,5,8,12,2)
NR1D = mt_makediff(source,NR1)
DD = mt_lutxy(spatD,NR1D,"x 128 - abs y 128 - abs < x y ?")
NR1x = source.mt_makediff(DD,U=2,V=2)
NR1x_super = NR1x.MSuper(pel=2, levels=1, chroma=true)
NR2 = NR1x.MDegrain2(NR1x_super,vb1,vf1,vb2,vf2,thSAD=240,thSCD1=350,thSCD2=115,limit=200)
#NR2.SeeSaw(NRlimit=3, NRlimit2=4, Sstr=1.4, Slimit=5, Spower=5, Sdamplo=6, Szp=16)
NR2.LSFmod(defaults="slow",preblur="ON",strength=100)
Gradfun2dbmod(thr=1.4,thrC=1.8,str=1.2,temp=60)