2qw34e · 19-Ноя-19 18:18(5 лет 1 месяц назад, ред. 09-Янв-21 18:15)
Metropolitan LineРелиз: xx.11.2019 | Обновлён: xx.xx.xxxx | Версия: 1.0 | Разработчик: Just Trains | Тип: Маршрут | Совместимость: Train Simulator (ЛИЦЕНЗИЯ и ПИРАТКА) | Язык: АнглийскийДополнение доступно для покупки в цифровом магазине Just TrainsМаршрут предназначен для использования с 64-битным Train Simulator и не менее 8 ГБ оперативной памятиИнформация о дополнении: The London Underground Metropolitan line runs from the busy heart of the City of London at Aldgate up to leafy Amersham in Buckinghamshire. The contrast between the two ends of the route is stark! Moving out from the sub-surface section north of Finchley Road, you drive through the urban area of West London and eventually drive into the countryside past Harrow-on-the-Hill station. Driving further, you have the option of branching left to see the Art Deco terminus of Uxbridge, turning north further up the line onto the branch line to Watford or, further still, experiencing the countryside on the beautiful branch to Chesham. The line terminates at Amersham in the north. The route has been extensively researched to give you an authentic London Underground driving experience. All the 34 surface and sub-surface stations are authentically detailed and modelled. Each of the different tunnel sections reflects the numerous different styles found on the route, from 'cut and cover' to the round style. The deep cuttings in the Metropolitan area are carefully modelled along with the distinctive buildings surrounding the track. Authentic London Underground signalling is used throughout the route, which is extensively detailed with appropriate line side equipment and structures. Требования для маршрута:
S7+1 Advanced - Underground StockРелиз: xx.xx.xxxx | Обновлён: 07.05.2020 | Версия: 1.03 | Разработчик: Just Trains | Тип: Подвижной состав | Совместимость: Train Simulator (ЛИЦЕНЗИЯ и ПИРАТКА) | Язык: АнглийскийДополнение доступно для покупки в цифровом магазине Just TrainsСценарии в этом дополнении предназначены для использования с 64-битным Train Simulator и не менее 8 ГБ оперативной памятиИнформация о дополнении: S7+1 London Underground stock has been in service since 2010 and is only used on the Metropolitan line. The S stock ('S' stands for 'Sub-surface’) has less seating than previous trains but is capable of faster acceleration and has more room for standing passengers. S7+1 stock has air conditioning and low floors to facilitate access for disabled passengers. It is possible for passengers to walk from one car to the next while the train is moving. The S7+1 has been developed in conjunction with a current S7+1 driver to ensure the utmost authenticity and accuracy and 13 scenarios for Just Trains' Metropolitan Line route are included. 13 стандартных сценариев для маршрута Metropolitan Line:
(S7+1) Train 473 1052 Baker Street to Harrow-on-the-Hill
(S7+1) Train 473 1133 Harrow-on-the-Hill to Neasden ECS
(S7+1) Train 403 1501 Aldgate to Chesham
(S7+1) Train 405 0711 Neasden to Baker Street ECS
(S7+1) Train 405 1654 Chesham to Aldgate
(S7+1) Train 435 0614 Uxbridge to Aldgate
(S7+1) Train 424 1518 Watford to Baker Street
Features:
Authentic carriage number displayed in cab and in correct sequence on the exterior of each carriage. De-icing units have a blue dot next to the carriage number.
Red/black toe livery versions included
Pick-up shoe random sparking effect
Working external matrix-style destination displays on the front, rear and sides of the carriages; these change depending on which journey is entered into the TCMS
Скриншоты
S8 Advanced - Underground StockРелиз: xx.xx.2019 | Обновлён: 07.05.2020 | Версия: 1.06 | Разработчик: Just Trains | Тип: Подвижной состав | Совместимость: Train Simulator (ЛИЦЕНЗИЯ и ПИРАТКА) | Язык: АнглийскийДополнение доступно для покупки в цифровом магазине Just TrainsСценарии в этом дополнении предназначены для использования с 64-битным Train Simulator и не менее 8 ГБ оперативной памятиИнформация о дополнении: The S8 London Underground stock has been in service since 2010 and is used on the Metropolitan, District, Circle and Hammersmith & City lines. The S stock ('S' stands for 'Sub-surface') has less seating than previous trains, but is capable of faster acceleration and has more room for standing passengers. S8 stock has air conditioning and low floors to facilitate access for disabled passengers and it is possible for passengers to walk from one car to the next while the train is moving. The S8 has been developed in conjunction with a current S8 driver to ensure the utmost authenticity and accuracy. 12 стандартных сценариев для маршрута London - Aylesbury и Chiltern Main Line + Aylesbury Extension:
JT S8 – 437 07:14 Amersham-Aldgate
JT S8 – At the End of the Day
JT S8 – Early Start
JT S8 – Empty to Rickmansworth
JT S8 – Lazy Sunday Afternoon
JT S8 – Rickmansworth Start
JT S8 – Saturday Night in London
JT S8 – Snow Sunday
JT S8 – Total Chaos
JT S8 - 426 07:18 Harrow - Amersham
JT S8 – Builder's Bag Bother (Part 1)
JT S8 – Builder's Bag Bother (Part 2)
13 стандартных сценариев для маршрута Metropolitan Line:
(S8) Train 443 0645 Neasden Depot to Uxbridge
(S8) Train 406 1147 Amersham to Aldgate
(S8) Train 433 2056 Aldgate to Uxbridge
(S8) Train 436 2308 Uxbridge to Harrow-on-the-Hill (ECS Harrow-on-the-Hill to Neasden)
(S8) Train 442 0754 Aldgate to Amersham
(S8) Train 442 2051 Amersham to Watford ECS
(S8) Train 473 1052 Baker Street to Harrow-on-the-Hill
(S8) Train 473 1133 Harrow-on-the-Hill to Neasden ECS
(S8) Train 403 1501 Aldgate to Chesham
(S8) Train 405 0711 Neasden to Baker Street ECS
(S8) Train 405 1654 Chesham to Aldgate
(S8) Train 435 0614 Uxbridge to Aldgate
(S8) Train 424 1518 Watford to Baker Street
Features:
Authentic carriage number displayed in cab and in correct sequence on the exterior of each carriage. De-icing units have a blue dot next to the carriage number.
Red/black toe livery versions included
Pick-up shoe random sparking effect
Working external matrix-style destination displays on the front, rear and sides of the carriages; these change depending on which journey is entered into the TCMS
Скриншоты
Chiltern Main Line: London - Birmingham
Chiltern Main Line: London - BirminghamРелиз: xx.xx.xxxx | Обновлён: xx.xx.xxxx | Версия: 1.08 | Разработчик: Just Trains | Тип: Маршрут | Совместимость: Train Simulator (ЛИЦЕНЗИЯ и ПИРАТКА) | Язык: АнглийскийДополнение доступно для покупки в цифровом магазине Just TrainsМаршрут предназначен для использования с 64-битным Train Simulator и не менее 8 ГБ оперативной памятиИнформация о дополнении: The line from London to Birmingham is known as the Chiltern Main Line and runs from its London terminus at Marylebone north-west to Birmingham Snow Hill. Set around 2012-2016, this Quick Drive enabled Train Simulator route is approximately 112 miles in length and features 40 detailed stations, numerous new custom assets, 14 Standard scenarios and two Free Roams. Also included (courtesy of Matthew Wilson, Vulcan Productions) are a Chiltern livery for the Dovetail Games Class 68 and a Chiltern livery for the Mk.3 Standard Class and Business Zone carriages. These carriages have brand new animated plug doors with functional body-side indicator lights, custom window layouts and 3D window frames for extra detail along with high definition decals for new auto-numbering, accurate fleet running numbers, larger step boards and corner pillars, emergency egress handles, up-scaled textures for higher resolution liveries, and custom script for implementation of the additional detailed items. Требования для маршрута:
Beautifully detailed and immersive scenery from London Marylebone to Birmingham Snow Hill
Includes 14 Standard scenarios
Quick Drive enabled
40 custom-built stations
Many custom-built prominent buildings and objects
Схема маршрута
Скриншоты
Chiltern Main Line: London - Aylesbury Extension
Chiltern Main Line: London - Aylesbury ExtensionРелиз: xx.xx.xxxx | Обновлён: xx.xx.xxxx | Версия: 1.06 | Разработчик: Just Trains | Тип: Расширение маршрута | Совместимость: Train Simulator (ЛИЦЕНЗИЯ и ПИРАТКА) | Язык: АнглийскийДополнение доступно для покупки в цифровом магазине Just TrainsМаршрут предназначен для использования с 64-битным Train Simulator и не менее 8 ГБ оперативной памятиИнформация о дополнении: This London-Aylesbury route runs between London Marylebone and Aylesbury Vale Parkway station in Buckinghamshire. The line is approximately 45 miles in length, with a total route mileage of around 85 miles. You can drive it via Amersham or via High Wycombe and Princes Risborough. 41 stations are included, including two on the Princes Risborough-Aylesbury branch line, and numerous new custom assets. The route is Quick Drive enabled and comes with 15 Standard scenarios that allow you to drive Chiltern services on the same rails as the Metropolitan Line, to drive the now-retired Class 121 'Bubble Cars'* on the Aylesbury-Princes Risborough branch line and also to drive 5MT and V2 steam loco’s on the Metropolitan Line. Требования для маршрута:
[JustTrains] Chiltern Main Line: London - Birmingham
Требования для сценариев:
[DTG] Network SouthEast Class 121 DMU Add-On
[JustTrains] BR 5MT Advanced
[JustTrains] LNER V2 Advanced
[JustTrains] Class 20 Advanced Collection
Route features:
Route class: Modern
Route length: ca. 45 miles, total route mileage around 85 miles
Beautifully detailed and immersive scenery ranging from Marylebone in London out to the open country of the Aylesbury area
Drive the branch line between Princes Risborough and Aylesbury
Includes a section of the London Underground Metropolitan line from West Hampstead to Amersham
Run on the exact same metals as the Metropolitan line for part of the route
Includes accurate London Underground system signalling
Includes a drivable AI (Artificial Intelligence) London Underground S8 tube train. (This is not a fully detailed/functional model and is supplied as a free bonus for your enjoyment.)
Includes 15 standard scenarios
Route is Quick Drive enabled
Custom-built stations
Many custom-built prominent buildings and objects
Скриншоты
London - Aylesbury
London - AylesburyРелиз: xx.xx.xxxx | Обновлён: xx.xx.xxxx | Версия: 1.03 | Разработчик: Just Trains | Тип: Маршрут | Совместимость: Train Simulator (ЛИЦЕНЗИЯ и ПИРАТКА) | Язык: АнглийскийДополнение доступно для покупки в цифровом магазине Just TrainsМаршрут предназначен для использования с 64-битным Train Simulator и не менее 8 ГБ оперативной памятиИнформация о дополнении: This London-Aylesbury route runs between London Marylebone and Aylesbury Vale Parkway station in Buckinghamshire. The line is approximately 45 miles in length, with a total route mileage of around 85 miles. You can drive it via Amersham or via High Wycombe and Princes Risborough. 41 stations are included, including two on the Princes Risborough-Aylesbury branch line, and numerous new custom assets. The route is Quick Drive enabled and comes with 19 Standard scenarios that allow you to drive Chiltern services on the same rails as the Metropolitan Line, to drive the now-retired Class 121 'Bubble Cars'* on the Aylesbury-Princes Risborough branch line and also to drive 5MT and V2 steam loco’s on the Metropolitan Line. Требования для маршрута:
Route length: ca. 45 miles, total route mileage around 85 miles
Beautifully detailed and immersive scenery ranging from Marylebone in London out to the open country of the Aylesbury area
Drive the branch line between Princes Risborough and Aylesbury
Includes a section of the London Underground Metropolitan line from West Hampstead to Amersham
Run on the exact same metals as the Metropolitan line for part of the route
Includes accurate London Underground system signalling
Includes a drivable AI (Artificial Intelligence) London Underground S8 tube train. (This is not a fully detailed/functional model and is supplied as a free bonus for your enjoyment.)
Includes 19 standard scenarios
Route is Quick Drive enabled
Custom-built stations
Many custom-built prominent buildings and objects
Скриншоты
Установка: A.Распаковать *.rwpархив любым архиватором (на ваш вкус) в папку с игрой B.Установить *.rwpчерез Utilities.exe (находится в папке с игрой)!!! РАЗДАЧА ОБНОВЛЕНА 04.01.2021 !!!Обновлены:Chiltern Main Line до версии 1.08 Aylesbury Extension до версии 1.06Пожалуйста, перекачайте *.torrent файлПожалуйста, не уходите с раздачи!
78353187Сценариев нет? Как вообще тронуться? Ключ повернул, реверс вперёд, а на контроллер нет реакции.
маршрут поставляется без сценариев (есть только быстрая игра), они есть в дополнении S7, как запустить поезд, пока сам не разобрался..
Is there any chance that we can have the updated version of the S8 Stock? The version 1.02 isn't 100% compatible with the new Metropolitan Line. Many thanks if you can!
current version of the Just Trains S8 Advanced is v1.04 The below log shows all updates for this product since release: v1.04 - Added missing rail shoe to Driver and Ai models. - Fixed bug in scenario S8 T442 07:45 Aldgate to Amersham v1.03 - Collison boxes reduced in size to allow tight bends to be driven without collision. - Poly reduction in models to help increase frame rates in Driver and Ai versions. - SCAT icon visual quality improved. - Pneumatic sound added to Tripcock reset function. - Added Metropolitan Line destinations to TCMS station name display. - Scenarios for Metropolitan line route included. - Johnston font replaces previous font internally and externally. - Two additional camera views in passenger view, now three in total. - Fixed loss of train numbers after a save and resume. - Reduced brightness and angle of headlights to be more authentic in tunnels. v1.02 - This update places a missing Passenger Emergency Alarm (PEA) scenario marker for the scenario; Saturday night in London. - Two new scenarios; JT S8 - Builders Bag Bother (Part 1) and JT S8- Builders Bag bother (Part 2)
Delete it the Blueprints.pak files and the stations are the same... Also, get a lot of this error on the start of some the addon scenarios Exception Code: 0xC0000005 Exception Info: ACCESS VIOLATION
78402396Delete it the Blueprints.pak files and the stations are the same... Also, get a lot of this error on the start of some the addon scenarios Exception Code: 0xC0000005 Exception Info: ACCESS VIOLATION
What are your specs of your computer? you may have to change your graphics settings
from the highest settings down to either high or medium settings, also try turning off the dynamic lighting or cloud.
78402396Delete it the Blueprints.pak files and the stations are the same... Also, get a lot of this error on the start of some the addon scenarios Exception Code: 0xC0000005 Exception Info: ACCESS VIOLATION
What are your specs of your computer? you may have to change your graphics settings
from the highest settings down to either high or medium settings, also try turning off the dynamic lighting or cloud.
78402396Delete it the Blueprints.pak files and the stations are the same... Also, get a lot of this error on the start of some the addon scenarios Exception Code: 0xC0000005 Exception Info: ACCESS VIOLATION
What are your specs of your computer? you may have to change your graphics settings
from the highest settings down to either high or medium settings, also try turning off the dynamic lighting or cloud.
I5-7600, nvidia 1070, 16gb ram
Make sure you have the latest drivers installed for your graphics card also latest directx also try uninstalling and reinstalling the route also make sure you have the Just Trains London to Aylesbury route installed which can be downloaded from here.
78402396Delete it the Blueprints.pak files and the stations are the same... Also, get a lot of this error on the start of some the addon scenarios Exception Code: 0xC0000005 Exception Info: ACCESS VIOLATION
What are your specs of your computer? you may have to change your graphics settings
from the highest settings down to either high or medium settings, also try turning off the dynamic lighting or cloud.
I5-7600, nvidia 1070, 16gb ram
Thanks buddy turning off dynamic lighting and cloud fixed the issue for me
!!! РАЗДАЧА ОБНОВЛЕНА 25.06.2020 !!!Обновлены Metropolitan Line и S7+1 Advanced до последних версийПерепаковал всё в *.rwp!!! РАЗДАЧА ОБНОВЛЕНА 28.06.2020 !!!Добавлены в раздачу:S8 Advanced - Underground Stock v1.06 (от 07.05.2020)
Chiltern Main Line: London to Birmingham v1.07 & Aylesbury Extension v1.05
London - Aylesbury v1.03Заново упаковал Chiltern Main Line и London to Aylesbury, теперь нет ошибок из-за нулевых размеров файлов
Oh my I only have 4GB of RAM my Train Simulator is going to crash constantly and I am going toget alot of lag on this is there anyway I can play this route properly please? And can you please upload the VP185 Enhancement pack from Armsrtong Powerhouse, the other one on Armstrong's Dubbing and Enhancement kits is outdated and I can't get any reskins for the outdated pack that was released https://www.armstrongpowerhouse.com/class_43_vp185-mk3_enhancement_pack?
Как всё таки запустить поезд метро? Охота покататься . Нажатие E и shift вызывает столбец справа,но сдвигов никаких .Нажимал и Е ,tp shift поезд не запускается .
