|
|
|
yarindos
Стаж: 15 лет 8 месяцев Сообщений: 179
|
yarindos ·
04-Апр-20 15:45
(4 года 10 месяцев назад)
Ребята,а какой путь в PFPX прописывать? куда кидать план?
|
|
|
|
Vitos0603
Стаж: 12 лет 4 месяца Сообщений: 185
|
Vitos0603 ·
04-Апр-20 18:53
(спустя 3 часа)
yarindos писал(а):
79179429Ребята,а какой путь в PFPX прописывать? куда кидать план?
Username*\Documents\Aerosoft\General\A3XX Flightplans\
|
|
|
|
Vasily_P3D
Стаж: 6 лет 5 месяцев Сообщений: 10
|
Vasily_P3D ·
04-Апр-20 20:40
(спустя 1 час 47 мин.)
Добрый вечер! У кого-нибудь есть текстовый документ на подобие этого, чтобы работал GSX level 2 c A330? Буду очень благодарен 
[aircraft]
nosegear = 12.39
refueling = 0
battery = 0
pushbackraise = 0
pushbackdummyevent = 0
iscargo = 0
trafficcones = 1
preferredexit = 0
wingrootpos = 3.88 -1.46 0.46
wingtippos = 15.19 -6.70 1.35
fuelpos = 13.28 -5.77 0.99
waterpos = 0.00 0.00 -0.00
lavatorypos = 0.00 0.00 -0.00
engine1pos = -4.95 1.05 -0.79
engine2pos = 4.95 1.05 -0.78
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00
[exit1]
pos = -1.67 11.51 0.44 7.80
code = (L:NGXFwdLeftCabinDoor,number)
name = L Entry FWD
embeddedStair = 0
и т.д.
|
|
|
|
yarindos
Стаж: 15 лет 8 месяцев Сообщений: 179
|
yarindos ·
04-Апр-20 23:25
(спустя 2 часа 45 мин.)
Vitos0603 писал(а):
79180782
yarindos писал(а):
79179429Ребята,а какой путь в PFPX прописывать? куда кидать план?
Username*\Documents\Aerosoft\General\A3XX Flightplans\
Спасибо)
|
|
|
|
Miki6323
Стаж: 10 лет 1 месяц Сообщений: 3
|
Miki6323 ·
09-Апр-20 17:52
(спустя 4 дня)
Halamadrid_1 писал(а):
79193620У кого-нибудь есть пэйнт кит для А330?
Anyone has a paint kit?
+1
|
|
|
|
vanik81
Стаж: 14 лет 4 месяца Сообщений: 56
|
vanik81 ·
17-Апр-20 06:02
(спустя 7 дней)
Vasily_P3D писал(а):
79181503Добрый вечер! У кого-нибудь есть текстовый документ на подобие этого, чтобы работал GSX level 2 c A330? Буду очень благодарен
[aircraft]
nosegear = 12.39
refueling = 0
battery = 0
pushbackraise = 0
pushbackdummyevent = 0
iscargo = 0
trafficcones = 1
preferredexit = 0
wingrootpos = 3.88 -1.46 0.46
wingtippos = 15.19 -6.70 1.35
fuelpos = 13.28 -5.77 0.99
waterpos = 0.00 0.00 -0.00
lavatorypos = 0.00 0.00 -0.00
engine1pos = -4.95 1.05 -0.79
engine2pos = 4.95 1.05 -0.78
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00
[exit1]
pos = -1.67 11.51 0.44 7.80
code = (L:NGXFwdLeftCabinDoor,number)
name = L Entry FWD
embeddedStair = 0
и т.д.
вот:
[aircraft]
nosegear = 24.56
refueling = 1
battery = 1
iscargo = 0
trafficcones = 1
preferredexit = 0
wingrootpos = 3.01 0.48 1.10
wingtippos = 28.96 -9.14 1.10
fuelpos = 16.00 -2.25 -0.03
waterpos = 0.00 0.00 0.00
lavatorypos = 0.00 0.00 0.00
engine1pos = -9.47 4.25 -2.87
engine2pos = 9.47 4.25 -2.87
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00
[exit1]
pos = -2.50 25.35 -0.15 0.00
code = 1
name = Exit 1
embeddedStair = 0
[exit2]
pos = -2.80 13.40 -0.15 0.00
code = 1
name = Exit 1
embeddedStair = 0
[exit3]
remove = 1
[exit4]
pos = -2.38 -19.76 0.03 0.00
code = 1
name = Exit 1
embeddedStair = 0
[service1]
flip = 1
code = 0
embeddedStair = 0
[service2]
flip = 4
code = 0
embeddedStair = 0
[cargo1]
pos = 1.58 21.61 -2.38 0.00
code = 0
embeddedStair = 0
uldcode = AUTO
[cargo2]
pos = 1.58 -13.17 -2.41 0.00
code = 0
embeddedStair = 0
uldcode = AUTO
[cargomain]
remove = 1
|
|
|
|
дин рид
Стаж: 12 лет 6 месяцев Сообщений: 345
|
дин рид ·
17-Апр-20 12:15
(спустя 6 часов)
Как в пятый препар поставить?
|
|
|
|
neologhot
Стаж: 13 лет 9 месяцев Сообщений: 690
|
neologhot ·
17-Апр-20 15:23
(спустя 3 часа)
дин рид
Порядок такой - ставишь как на 4, если не работает - ждешь апдейт крафта под 5 препар
|
|
|
|
Super_Hot
Стаж: 10 лет 7 месяцев Сообщений: 24
|
Super_Hot ·
17-Апр-20 17:41
(спустя 2 часа 18 мин.)
Хмм...Не удалось поставить на V5,инсталер ошибку выдаёт.
|
|
|
|
Bogdan1297
Стаж: 13 лет Сообщений: 2
|
Bogdan1297 ·
19-Апр-20 00:39
(спустя 1 день 6 часов)
qhani92 писал(а):
79181435Untill yesterday, AS Cracker V3 worked, now is not working anymore. Only V2 works.
Try to disable Windows Defender. It helped me.
|
|
|
|
pgenadich
Стаж: 16 лет Сообщений: 8
|
pgenadich ·
19-Апр-20 14:21
(спустя 13 часов)
Парни, подскажите кто сталкивался, в режиме NAV самолет клонит влево, по маршруту не летит.
|
|
|
|
silvesstall
Стаж: 13 лет 4 месяца Сообщений: 3793
|
silvesstall ·
19-Апр-20 15:02
(спустя 41 мин.)
pgenadich
Может триммера?
Хотя нонешний АСофт, уже не тот софт. Почитав про многие косяки от авторитетных людей, до сих не имею стремления.
|
|
|
|
pgenadich
Стаж: 16 лет Сообщений: 8
|
pgenadich ·
19-Апр-20 15:48
(спустя 45 мин.)
silvesstall писал(а):
79281991pgenadich
Может триммера?
Хотя нонешний АСофт, уже не тот софт. Почитав про многие косяки от авторитетных людей, до сих не имею стремления.
Очень странно( выключаю NAV в HDG все четко работает. Как только врубаю NAV опять тянет влево. Причем даже DIR на точку не работает, игнорит и продолжает лететь влево.
Переустанавливал самолет, результата 0.
|
|
|
|
silvesstall
Стаж: 13 лет 4 месяца Сообщений: 3793
|
silvesstall ·
19-Апр-20 18:04
(спустя 2 часа 16 мин., ред. 19-Апр-20 18:04)
pgenadich
Извини, ХЗ.)) Не ставил, не проверял.
Хотя буквально на днях один товарищ спрашивал, почему самолёты летают боком, а не прямо.)) Может по этой же причине и кажется, что "тянет влево" .... ? У нас русских, куда рукой показывают, туда и надо поворачивать ... а не направо, налево ... ))
pgenadich писал(а):
79282270Причем даже DIR на точку не работает, игнорит и продолжает лететь влево.
Согласование по ЖыПээС проведено в начале полёта??
|
|
|
|
pgenadich
Стаж: 16 лет Сообщений: 8
|
pgenadich ·
19-Апр-20 18:50
(спустя 45 мин.)
silvesstall писал(а):
79283093pgenadich
Извини, ХЗ.)) Не ставил, не проверял.
Хотя буквально на днях один товарищ спрашивал, почему самолёты летают боком, а не прямо.)) Может по этой же причине и кажется, что "тянет влево" .... ? У нас русских, куда рукой показывают, туда и надо поворачивать ... а не направо, налево ... ))
pgenadich писал(а):
79282270Причем даже DIR на точку не работает, игнорит и продолжает лететь влево.
Согласование по ЖыПээС проведено в начале полёта??
Само собой. Полный prepar.
|
|
|
|
silvesstall
Стаж: 13 лет 4 месяца Сообщений: 3793
|
silvesstall ·
19-Апр-20 18:55
(спустя 4 мин.)
pgenadich
Тогда значит это аэрософт.(
|
|
|
|
egorov1973
Стаж: 15 лет 1 месяц Сообщений: 20
|
egorov1973 ·
24-Апр-20 06:05
(спустя 4 дня, ред. 24-Апр-20 06:05)
Приветствую, коллеги! Кто сталкивался с проблемой такого рода: после установки А330, сим (v 4.5) начинает вылетать при загрузке полета. При этом, не только с этим арбузом, но и со всеми остальными от Аэрософт. В чем может быть проблема? Переустанавливал несколько раз А330, всё то же. Хотя, после его удаления, всё работает нормально. Simconect установлен и последний Visual тоже есть. Прошу помощи.
|
|
|
|
paul793
Стаж: 7 лет 7 месяцев Сообщений: 82
|
paul793 ·
24-Апр-20 17:16
(спустя 11 часов)
|
|
|
|
msiawesome
Стаж: 4 года 10 месяцев Сообщений: 7
|
msiawesome ·
24-Апр-20 19:34
(спустя 2 часа 18 мин., ред. 24-Апр-20 19:34)
Sorry if this is a dumb question but how do I install it? When I run the installer it asks me for my email and serial number
EDIT: I am dumb sorry, on the registration page you open the crack then click next
google translate:
Извините, если это глупый вопрос, но как мне его установить? Когда я запускаю установщик, он спрашивает мой адрес электронной почты и серийный номер
РЕДАКТИРОВАТЬ: я тупой извините, на странице регистрации вы открываете трещину, а затем нажмите кнопку Далее
|
|
|
|
Artem.zx656
Стаж: 11 лет 5 месяцев Сообщений: 1
|
Artem.zx656 ·
26-Апр-20 13:57
(спустя 1 день 18 часов)
pgenadich писал(а):
79281746Парни, подскажите кто сталкивался, в режиме NAV самолет клонит влево, по маршруту не летит.
Я сталкивался с такой проблемой на А320 Аэрософта, пришлось обновить Препар и это помогло.
|
|
|
|
Diatzelo
Стаж: 6 лет 10 месяцев Сообщений: 11
|
Diatzelo ·
27-Апр-20 02:52
(спустя 12 часов)
The Cracker is not opening
|
|
|
|
msiawesome
Стаж: 4 года 10 месяцев Сообщений: 7
|
msiawesome ·
28-Апр-20 03:33
(спустя 1 день)
XRIST0 писал(а):
79332440
Diatzelo писал(а):
79332281The Cracker is not opening
Must disable windows defender, that is stopping it from opening..
Anyhow, tried to get this to work in v5 and no dice, it did install just fine but when I load into a flight it comes up with an error saying "ND log cannot be created" for both a320/a330.. will have to wait for the update
I asked in the other Aerosoft thread and they said you have to copy stuff from a p3dv5 folder into a new p3dv4 folder in program data
Here is a link to that post of his, it worked for me, hope it does for you too!
|
|
|
|
SimFree
Стаж: 17 лет 8 месяцев Сообщений: 454
|
SimFree ·
01-Май-20 02:41
(спустя 2 дня 23 часа, ред. 01-Май-20 02:41)
Всё нормально работает 319-330 в Prepar3d V5
только надо сделать пару моментов, на примере А333
Если ранее Арасофт установлен в Prepar3d V4
1 добавить Package в add-ons.cfg по пути C:\ProgramData\Lockheed Martin\Prepar3D v5
здесь пути мои к примеру, указываете свои!
скрытый текст
[Package.0]
PATH=e:\Aerosoft\Aerosoft A320-A321 Professional
TITLE=Aerosoft A320-A321 Professional
ACTIVE=true
REQUIRED=false
[Package.1]
PATH=e:\Aerosoft\Aerosoft A330 Professional
TITLE=Aerosoft A330 Professional
ACTIVE=true
REQUIRED=false
2. Идем где установлен Арасофт у меня по пути \Aerosoft\Aerosoft A330 Professional\SimObjects\Airplanes\Aerosoft A333 RR Professional
берем две папки RealLight и TrueGlass упаковываем Rar и удаляем папки, которые упаковали
3. в этой же папке идём в \Aerosoft\Aerosoft A330 Professional\SimObjects\Airplanes\Aerosoft A333 RR Professional\Panel
там будет два файла panel-copy.cfg b panel.cfg (panel.cfg бэкапим или удаляем, panel-copy.cfg переименовываем в panel.cfg)
Если не Установлен Арасофт , при установке указываем путь к Prepar3d v5 (или шаманим реестр) и идем к 1 шаг
Запускаем препар выбираем Арасофт , летим и радуемся
|
|
|
|
obruchev
Стаж: 17 лет 3 месяца Сообщений: 19
|
obruchev ·
01-Май-20 09:37
(спустя 6 часов)
Ваш способ установки работает. Только у меня почему-то в меню МКДУ не активны опции панел стейт. в колд энд дарк не получается загрузить. Не знаете в чем причина
|
|
|
|
SimFree
Стаж: 17 лет 8 месяцев Сообщений: 454
|
SimFree ·
01-Май-20 13:58
(спустя 4 часа, ред. 01-Май-20 15:28)
Попробуй Загрузить сначала дефолтный крафт , а потом выбрать арасофт
Арасофт по новой установлен в П5, или ранее установлен в П4 ?
|
|
|
|
louis_james77
Стаж: 5 лет 6 месяцев Сообщений: 9
|
louis_james77 ·
01-Май-20 14:23
(спустя 25 мин., ред. 01-Май-20 14:23)
On the a330 i get this error when trying to spawn in, The ND log file could not be generated
http://prntscr.com/s95k1o
|
|
|
|
obruchev
Стаж: 17 лет 3 месяца Сообщений: 19
|
obruchev ·
01-Май-20 16:36
(спустя 2 часа 13 мин.)
По новой в п3д в5. Так и делал, сначала дефолтный потом асофт. П3Д В4 удалил и шаманил с реестором. Пятая версия его увидела и подхватила.
|
|
|
|
Jacob Bremens
Стаж: 4 года 11 месяцев Сообщений: 25
|
Jacob Bremens ·
01-Май-20 21:28
(спустя 4 часа)
Anyone have A330 v1.0.0.10?
|
|
|
|
pepe143
Стаж: 12 лет 4 месяца Сообщений: 53
|
pepe143 ·
03-Май-20 19:47
(спустя 1 день 22 часа, ред. 03-Май-20 19:47)
New installation, define default state A-330 in P3D4 or 5:
1. Shift-4 (MCDU-2), ACFT State - Load Taxi state, SET DEF
2. Wait...
2a. Control ND-PFD OK?
2b. Back to MCDU-2
3. Load Cold Dark state, SET DEF
3a. Wait...
4. Connect to external power, Battery must be ON or APU
5. ScreenShot, left place - PFD and ND BRT - adjust brightness approx. 1/2
|
|
|
|
leonvmetcalf
Стаж: 7 лет 9 месяцев Сообщений: 9
|
leonvmetcalf ·
07-Май-20 05:55
(спустя 3 дня)
скрытый текст
[error.0]
error=Failed to locate the following script: A330_Cabin.lua. Verify all content pathing is correctly configured.
[error.1]
error=Failed to locate the following script: A330_Cabin.lua. Verify all content pathing is correctly configured.
[error.2]
error=Failed to locate the following script: A330_Cabin.lua. Verify all content pathing is correctly configured.
[error.3]
error=Failed to locate the following script: A330_Cabin.lua. Verify all content pathing is correctly configured.
[error.4]
error=Failed to locate the following script: A330_Cabin.lua. Verify all content pathing is correctly configured.
[error.5]
error=Failed to locate the following script: A330_Cabin.lua. Verify all content pathing is correctly configured.
[error.6]
error=Failed to locate the following script: A330_Cabin.lua. Verify all content pathing is correctly configured.
[error.7]
error=Failed to locate the following script: A330_Cabin.lua. Verify all content pathing is correctly configured.
[error.8]
error=Failed to locate the following script: A330_Cabin.lua. Verify all content pathing is correctly configured.
[error.9]
error=Failed to locate the following script: A330_Cabin.lua. Verify all content pathing is correctly configured.
[error.10]
error=Failed to locate the following script: A330_Cabin.lua. Verify all content pathing is correctly configured.
[error.11]
error=Failed to locate the following script: A330_Cabin.lua. Verify all content pathing is correctly configured.
[error.12]
error=Failed to locate the following script: A330_Cabin.lua. Verify all content pathing is correctly configured.
[error.13]
error=Failed to locate the following script: A330_Cabin.lua. Verify all content pathing is correctly configured.
[error.14]
error=Failed to locate the following script: A330_Cabin.lua. Verify all content pathing is correctly configured.
[error.15]
error=The cab file header's file count does not match the folder count. For better performance, please have a folder per file to support random access. This could happen if the Prepar3D SDK's CabDir tool is not used. File: D:\Games\Aerosoft\Aerosoft A330 Professional\SimObjects\Airplanes\Aerosoft A333 RR Professional\panel\../../Aerosoft A330 Professional Base/Panel_Fallback/KeysSEL.CAB
[error.16]
error=The cab file header's file count does not match the folder count. For better performance, please have a folder per file to support random access. This could happen if the Prepar3D SDK's CabDir tool is not used. File: D:\Games\Aerosoft\Aerosoft A330 Professional\SimObjects\Airplanes\Aerosoft A333 RR Professional\panel\../../Aerosoft A330 Professional Base/Panel_Fallback/KeysSEL2.CAB
[error.17]
error=Gauge file not found: ../../Aerosoft A330 Professional Base/Panel_Fallback/BCA_Tmp!Var_Test
[error.18]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.19]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.20]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.21]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.22]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.23]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.24]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.25]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.26]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.27]
error=Gauge/Script Error
Type: Gauge
Name: AB_Clock_Disp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.28]
error=Gauge/Script Error
Type: Gauge
Name: Com1ADisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.29]
error=Gauge/Script Error
Type: Gauge
Name: Com1ADisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.30]
error=Gauge/Script Error
Type: Gauge
Name: Com1ADisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.31]
error=Gauge/Script Error
Type: Gauge
Name: Com1ADisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.32]
error=Gauge/Script Error
Type: Gauge
Name: Com1SDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.33]
error=Gauge/Script Error
Type: Gauge
Name: Com1SDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.34]
error=Gauge/Script Error
Type: Gauge
Name: Com1SDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.35]
error=Gauge/Script Error
Type: Gauge
Name: Com1SDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.36]
error=Gauge/Script Error
Type: Unknown
Name: Unknown
Error: Panel Background (1024) bitmap not found: "D:\Games\Aerosoft\Aerosoft A330 Professional\SimObjects\Airplanes\Aerosoft A333 RR Professional\panel\$A330_GAUGES.bmp"
[error.37]
error=Gauge/Script Error
Type: Gauge
Name: Com1ADisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.38]
error=Gauge/Script Error
Type: Gauge
Name: Com1ADisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.39]
error=Gauge/Script Error
Type: Gauge
Name: Com1ADisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.40]
error=Gauge/Script Error
Type: Gauge
Name: Com1ADisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.41]
error=Gauge/Script Error
Type: Gauge
Name: Com1SDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.42]
error=Gauge/Script Error
Type: Gauge
Name: Com1SDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.43]
error=Gauge/Script Error
Type: Gauge
Name: Com1SDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.44]
error=Gauge/Script Error
Type: Gauge
Name: Com1SDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.45]
error=Gauge/Script Error
Type: Gauge
Name: AB_Clock_Disp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.46]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.47]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.48]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.49]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.50]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.51]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.52]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.53]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.54]
error=Gauge/Script Error
Type: Gauge
Name: BattDisp
Error: Invalid script (command not found - perhaps a space is missing or there's an extra space?): ")" in: )
[error.55]
error=Gauge/Script Error
Type: Gauge
Name: Checklist
Error: Undefined environment/program keyword in XML: "Absolute_Time".
[error.56]
error=Gauge/Script Error
Type: Gauge
Name: Checklist
Error: Invalid variable name: "Absolute_Time"
[error.57]
error=Gauge/Script Error
Type: Gauge
Name: Checklist
Error: Undefined environment/program keyword in XML: "Absolute_Time".
[error.58]
error=Gauge/Script Error
Type: Gauge
Name: Checklist
Error: Invalid variable name: "Absolute_Time"
[error.59]
error=PitchPanRate should be between 0.0 and 100.0 degrees per second.
Camera: GLARESHIELD MAIN PANEL
[error.60]
error=HeadingPanRate should be between 0.0 and 100.0 degrees per second.
Camera: GLARESHIELD MAIN PANEL
[error.61]
error=PitchPanRate should be between 0.0 and 100.0 degrees per second.
Camera: LOWER ECAM - TRIM WHEEL
[error.62]
error=HeadingPanRate should be between 0.0 and 100.0 degrees per second.
Camera: LOWER ECAM - TRIM WHEEL
[error.63]
error=PitchPanRate should be between 0.0 and 100.0 degrees per second.
Camera: PEDESTAL - PARK BRAKE - RUDDER TRIM
[error.64]
error=HeadingPanRate should be between 0.0 and 100.0 degrees per second.
Camera: PEDESTAL - PARK BRAKE - RUDDER TRIM
[error.65]
error=PitchPanRate should be between 0.0 and 100.0 degrees per second.
Camera: OVERHEAD
[error.66]
error=HeadingPanRate should be between 0.0 and 100.0 degrees per second.
Camera: OVERHEAD
[error.67]
error=PitchPanRate should be between 0.0 and 100.0 degrees per second.
Camera: LOWER OVERHEAD
[error.68]
error=HeadingPanRate should be between 0.0 and 100.0 degrees per second.
Camera: LOWER OVERHEAD
[error.69]
error=PitchPanRate should be between 0.0 and 100.0 degrees per second.
Camera: FCU
[error.70]
error=HeadingPanRate should be between 0.0 and 100.0 degrees per second.
Camera: FCU
[error.71]
error=PitchPanRate should be between 0.0 and 100.0 degrees per second.
Camera: MCDU I
[error.72]
error=HeadingPanRate should be between 0.0 and 100.0 degrees per second.
Camera: MCDU I
[error.73]
error=PitchPanRate should be between 0.0 and 100.0 degrees per second.
Camera: EFB
[error.74]
error=HeadingPanRate should be between 0.0 and 100.0 degrees per second.
Camera: EFB
[error.75]
error=PitchPanRate should be between 0.0 and 100.0 degrees per second.
Camera: RADIO - WXR - ENG MASTER - SPOILERS - FLAPS
[error.76]
error=HeadingPanRate should be between 0.0 and 100.0 degrees per second.
Camera: RADIO - WXR - ENG MASTER - SPOILERS - FLAPS
[error.77]
error=PitchPanRate should be between 0.0 and 100.0 degrees per second.
Camera: TCAS - ATC - THRUST LEVERS
[error.78]
error=HeadingPanRate should be between 0.0 and 100.0 degrees per second.
Camera: TCAS - ATC - THRUST LEVERS
[error.79]
error=PitchPanRate should be between 0.0 and 100.0 degrees per second.
Camera: LEFT SIDE WINDOW
[error.80]
error=HeadingPanRate should be between 0.0 and 100.0 degrees per second.
Camera: LEFT SIDE WINDOW
[error.81]
error=PitchPanRate should be between 0.0 and 100.0 degrees per second.
Camera: RIGHT SIDE WINDOW
[error.82]
error=HeadingPanRate should be between 0.0 and 100.0 degrees per second.
Camera: RIGHT SIDE WINDOW
[error.83]
error=PitchPanRate should be between 0.0 and 100.0 degrees per second.
Camera: LOWER ECAM - TRIM WHEEL II
[error.84]
error=HeadingPanRate should be between 0.0 and 100.0 degrees per second.
Camera: LOWER ECAM - TRIM WHEEL II
[error.85]
error=PitchPanRate should be between 0.0 and 100.0 degrees per second.
Camera: PEDESTAL - PARK BRAKE - RUDDER TRIM II
[error.86]
error=HeadingPanRate should be between 0.0 and 100.0 degrees per second.
Camera: PEDESTAL - PARK BRAKE - RUDDER TRIM II
[error.87]
error=PitchPanRate should be between 0.0 and 100.0 degrees per second.
Camera: OXYGEN MASK
[error.88]
error=HeadingPanRate should be between 0.0 and 100.0 degrees per second.
Camera: OXYGEN MASK
[error.89]
error=PitchPanRate should be between 0.0 and 100.0 degrees per second.
Camera: UPPER OVERHEAD PANEL VIEW
[error.90]
error=HeadingPanRate should be between 0.0 and 100.0 degrees per second.
Camera: UPPER OVERHEAD PANEL VIEW
[error.91]
error=Texture RightEye failed to load (FE_REQUEST_STATUS==13)
[error.92]
error=Texture FocusRightEye failed to load (FE_REQUEST_STATUS==13)
[error.93]
error=Texture RightEye failed to load (FE_REQUEST_STATUS==13)
[error.94]
error=Texture FocusRightEye failed to load (FE_REQUEST_STATUS==13)
[error.95]
error=Texture RightEye failed to load (FE_REQUEST_STATUS==13)
[error.96]
error=Texture FocusRightEye failed to load (FE_REQUEST_STATUS==13)
[error.97]
error=Texture RightEye failed to load (FE_REQUEST_STATUS==13)
[error.98]
error=Texture FocusRightEye failed to load (FE_REQUEST_STATUS==13)
[error.99]
error=Failed to load visual effect "fx_launch8"
[error.100]
error=Failed to load visual effect "fx_launch9"
[error.101]
error=Failed to load visual effect "fx_launch10"
[error.102]
error=Failed to load visual effect "fx_launch11"
[error.103]
error=Failed to load visual effect "fx_launch12"
[error.104]
error=Failed to load visual effect "fx_firework16"
Кто-нибудь получает ошибки при загрузке некоторых особенностей самолета? Например, мои выноски GPWS не работают. Извините за плохой русский с помощью переводчика
|
|
|
|
