[P3D4] - MJC8 Q400 Pro Edition v1.020a (Aircraft)

Страницы :   Пред.  1, 2, 3, 4, 5, 6, 7, 8
Ответить
 

igolovin

Стаж: 10 лет 3 месяца

Сообщений: 1


igolovin · 23-Май-23 21:18 (1 год 11 месяцев назад, ред. 23-Май-23 21:18)

Пытаюсь установить по инструкции для PREPAR3d. Если копирую InstallOptions.dll в Temp папку на этапе выбора симулятора, система пишет, что не может заменить файл, так как он используется. Если заменяю этот файл в самом начале установки, мне не дают выбрать симулятор, а автоматически в путь пишут Microsoft Flight Simulator X.
Если прописываю путь вручную, то, вроде как устанавливается, но не работает MJC84 Control Panel. Хотя MJC84 System Panel работает нормально.
cpan/mjc84cpan.exe Не удалось запустить приложение, поскольку его параллельная конфигурация неправильна.
Что я делаю не так? Или это активатор для MSFS?
UPD: ответ есть на предыдущей странице, сразу не увидел
[Профиль]  [ЛС] 

XPilotX

Стаж: 3 года

Сообщений: 6

XPilotX · 01-Июн-23 18:26 (спустя 8 дней)

https://aviaworld.org/p3d-majestic-software-mjc8-q400-cockpit-edition-1025a/
[Профиль]  [ЛС] 

SKY_FLYER

Стаж: 16 лет 4 месяца

Сообщений: 216


SKY_FLYER · 12-Июн-23 17:10 (спустя 10 дней, ред. 12-Июн-23 17:10)

Сайт недоступен - не сохранилось ссылочки на файл ?
[Профиль]  [ЛС] 

jcirrus

Стаж: 12 лет 7 месяцев

Сообщений: 63


jcirrus · 14-Июн-23 03:40 (спустя 1 день 10 часов)

Hello,
How do I make the pedals rotate during take-off? I have the Mouse+Allerons option and it only works in the taxi. During take-off the pedals do not turn and I cannot lift the plane without leaving the runway. Previous versions did not have this problem. It should be noted that I do not have software for pedals.
Thanks.
[Профиль]  [ЛС] 

aberg.tor

Стаж: 14 лет 7 месяцев

Сообщений: 40


aberg.tor · 15-Июн-23 19:06 (спустя 1 день 15 часов)

jcirrus писал(а):
84841429Hello,
How do I make the pedals rotate during take-off? I have the Mouse+Allerons option and it only works in the taxi. During take-off the pedals do not turn and I cannot lift the plane without leaving the runway. Previous versions did not have this problem. It should be noted that I do not have software for pedals.
Thanks.
Olá amigo,
Try this....not sure if that will help.... I have pedals and I do trim the rudder for takeoff, climb, cruise and descend because of torque.
On C:\Program Files\Lockheed Martin\Prepar3D v5\SimObjects\Airplanes\mjc8q400\ini locate mjc84.ini and text YAW_DUE_TO_PROPWASH=1.0 try change to 0.0.
You lost the real simulation of torque but maintain runway alignment on takeoff.
[Профиль]  [ЛС] 

jcirrus

Стаж: 12 лет 7 месяцев

Сообщений: 63


jcirrus · 16-Июн-23 01:17 (спустя 6 часов)

aberg.tor писал(а):
84847054
jcirrus писал(а):
84841429Hello,
How do I make the pedals rotate during take-off? I have the Mouse+Allerons option and it only works in the taxi. During take-off the pedals do not turn and I cannot lift the plane without leaving the runway. Previous versions did not have this problem. It should be noted that I do not have software for pedals.
Thanks.
Olá amigo,
Try this....not sure if that will help.... I have pedals and I do trim the rudder for takeoff, climb, cruise and descend because of torque.
On C:\Program Files\Lockheed Martin\Prepar3D v5\SimObjects\Airplanes\mjc8q400\ini locate mjc84.ini and text YAW_DUE_TO_PROPWASH=1.0 try change to 0.0.
You lost the real simulation of torque but maintain runway alignment on takeoff.
Amigo,
I'm going to try.
tks
[Профиль]  [ЛС] 

SaniaNET

Стаж: 16 лет 6 месяцев

Сообщений: 151

SaniaNET · 22-Июн-23 21:23 (спустя 6 дней)

Есть у кого оригинальный апдейт 1.025а, можете поделиться?
[Профиль]  [ЛС] 

saimini

Стаж: 9 лет 5 месяцев

Сообщений: 2


saimini · 10-Июл-23 17:24 (спустя 17 дней)

https://www.fsx.org.cn/thread-26482-1-1.html
[Профиль]  [ЛС] 

antoherguywithoutcash

Стаж: 2 года 8 месяцев

Сообщений: 1


antoherguywithoutcash · 10-Янв-24 13:32 (спустя 5 месяцев)

Any update on 1.025 for P3D5-6?
[Профиль]  [ЛС] 

Dryin

Стаж: 16 лет 2 месяца

Сообщений: 5


Dryin · 01-Фев-25 18:27 (спустя 1 год)

https://www.fsx.org.cn/thread-26482-1-1.html
Кто смог скачать, выложили бы - сделали бы доброе дело.
[Профиль]  [ЛС] 

ex-al

Стаж: 13 лет 8 месяцев

Сообщений: 76


ex-al · 05-Фев-25 08:54 (спустя 3 дня)

поддерживаю
[Профиль]  [ЛС] 
 
Ответить
Loading...
Error